If you're looking to wire up your own SR20 swap, let me give you some assistance. As you know, you'll need to do some re-pinning to the connector between the 240SX Frame Harness and the SR20 Engine Harness. I made a spreadsheet showing the colors/functions of the both sides of the harness. In the middle, I show how I modified the Engine Harness to be compatible.
Note: I have not circuit checked the function of this harness yet, so I can't assure you that it will work (although, I know the FSM in and out now, so I'm hoping it's dead on). Also, use at your own risk. I won't be held accountable for any damage that occurs from this information. Finally, keep in mind that this is for a 1995 OBD-I 240sx. I believe there are some differences with 1996 and later OBD-II vehicles.
Anyways, it's a place to start. Feel free to leave comments/questions below.
1995 Nissan 240SX / S14 SR20DET Electrical System
No comments:
Post a Comment